- Manufacturer: PARTNERPLAST®
- Model: 800
- System components:
GPS Remote module:
- Receive the DC power from the Tail buoy or the streamer.
- Receive the GPS satellite signals from the internal satellite antenna/receiver and pass the data to the internal UHF transceiver or streamer or both.
- Receive synchronizing and command signals from, and transmit GPS data and status data to, the Master Radio Module on the Recording Vessel via the internal
- UHF radio transceiver and its external antenna or streamer or both simultaneously directly to the Buoylink PC
- The wire transmission is limited to approximately 6km with 2400baud
Master radio module:
- Transmit, via the radio telemetry link, synchronizing/timing and command signals to all the remote units in the network using radio.
- Receive, via the radio telemetry link, GPS and status data from all the remote units
- Accept programming information from the control PC to change the parameters of the radio transceiver in this module.
Master GPS interface unit:
- Provide DC power to the Master Radio Module
- Provide an interface for the remote unit data between the Master Radio Module and the control PC
PC with EX‐SEAMAP® Buoylink
- Control the radio telemetry and RS485 networks of remote modules
- Collect GPS data, process and display this GPS data to give a range and bearing from the Master to each unit, and distribute the data to other users
| PARTNERPLAST® | SEAMAP® BuoyLink RGPS Tracking System |
